Recent Flow

Magnetic flow meter

Installasi flow meter

Digital Flow Sensor

Flow meter


Flow meter Air Limbah

Magmeters are designed to measure the flow of fluids with conductivity greater than 20 microSiemens. For best accuracy, the conductivity of the fluid as it passes through the meter must remain uniform. Wide variations in conductivity result in “noise” or jumpy readings, resulting in inaccurate flow rates and totals. 

In recent years Seametrics flow measurement has become a leading manufacturer of electromagnetic meters (mag meters) in a variety of designs suitable to a wide range of applications.  These include insertion, spool, and low-flow chemical-resistant mag meters.

In control applications such as PLCs, motor drives, some injection pumps, 4-20 mA converters and other devices, a frequency proportional to flow rate (rather than a pulse output which relates to volume) is usually required. For compatibility with these devices, a High Frequency output (0-150 Hz at full flow) is available. 

The WMX has four output types as described below. When ordering a WMX101 or WMX104 with cable, the correct pulse output selection must be specified at time of order. 
Selecting the high frequency output is not recommended for the battery-powered WMX104 due to reduced battery life. 
This output may be changed by an authorized Seametrics distributor using the DC20 software and data cable. 

Down Load

The iMAG-Series is the most economical flanged electromagnetic flow meter on the market. It is used in 3” to 12”pipe in municipal or industrial water, waste water, pump stations and packaged plant applications. The iMAG has no moving parts and electrodes are designed to discourage fouling. 
This magmeter requires no maintenance in applications where debris would impede mechanical meters. There are no parts to wear out. 
Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. wira

The WMP104 is a full-bore, plastic-bodied electro magnetic flow meter designed for flow and usage monitoring applications in 2” pipe. 
The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. Its light weight and clamp flanges allow it to be easily installed or removed from the pipe for inspection*. 
There are multiple adapters available to allow for a wide variety of pipe mounting configurations.

Most Wanted

Top Article

Flowmeter Ultrasonic

Flowmeter ultrasonic  adalah jenis    flow meter yang prinsip kerjanya mengukur  kecepatan aliran suatu fluida dengan menggunakan ultra so...